Need help?Do you have a question about the FiberHome AN6001-G16 and is the answer not in the manual?
This manual aims to instruct users in configuring services of the AN6001-G16 through the Web GUI.
Identifies the target audience for the manual, including commissioning and operation engineers.
Describes the physical characteristics and design of the AN6001-G16.
Explains the role and placement of the AN6001-G16 in the network access solution.
Details the different power supply schemes supported by the AN6001-G16.
Details the modular design and port density for ease of installation and capacity.
Highlights features ensuring high availability, fault tolerance, and protection mechanisms.
Explains GUI-based management, command-line access, and software upgrade capabilities.
Provides a comprehensive list of all supported functions and features of the AN6001-G16.
Details key technical parameters such as dimensions, power, interfaces, and operating conditions.
Covers the initial setup of device management settings, including console access.
Provides step-by-step instructions for accessing the device's web interface.
Explains how to manage the AN6001-G16, including device info, reboot, and software upgrades.
Details methods for authenticating and authorizing ONUs connected to the system.
Guides on configuring local services like VLAN data, multicast, and voice services.
Explains the configuration of selective QinQ functionality for advanced VLAN tagging.
Covers configuration for data, voice, VEIP, CATV, WiFi, and WAN port services.
Provides procedures for viewing ONU information, upgrading software, and rebooting ONUs.
General| Device Type | GPON ONU |
|---|---|
| Model | AN6001-G16 |
| Manufacturer | FiberHome |
| GPON Standard | ITU-T G.984 |
| Transmission Distance | 20 km |
| Power Supply | 12V DC |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Wavelength | Tx: 1310nm, Rx: 1490nm |
To Next Page
