6
5
5. INSTRUCTIONS FOR DRIVER
4.3 LUBRICATION
3. Never turn the tractor to the right or left when the disc ridger is engaged in the
soil.
2. Properly fit the three point linkage as mentioned above & lock with lynch pin.
1. When disc ridger is ready for use don’t stand between disc ridger & the tractor.
4. Never reverse the tractor when the disc ridger is engaged in the soil.
Please take care that high quality grease is used in bearing hubs.
5. To get good results from the disc ridger, disc should be replaced when its
diameter is reduced by 5” from its original size.
Dear user!
Respect the Ecology.
Do not throw the trash away.
This gesture helps to protect our Environment.
5. FIGURES AND PART NO. DETAILS
To Next Page
Loading...