EN 13
FZN 4101-A / FZN 4102-AT
Operating instructions
Instructions for use
Turn on and operate the machine as described in the user's manual, carefully follow all instructions.
Before carrying out any kind of inspection, maintenance or repairs disconnect the charger power cable from
the mains power supply.
Use tools in good working condition for tasks for which they are designed.
Work only during good visibility or ensure sufficient artificial lighting.
Only store and use the product away from flammable or volatile materials and solutions.
Keep the product away from extreme temperatures, direct sunlight and excessive humidity. Do not use in a
dusty environment.
Do not place the product near heaters, open fires or other appliances or equipment that are sources of heat.
Do not spray the product with water or any other liquid. Do not pour water or any other liquids into the
appliance. Do not submerge the appliance in water or any other liquid.
Never leave the appliance switched on without supervision.
Do not touch machine parts until they have come to a complete stop.
Allow the motor to cool down before storing the machine in a closed room.
Under no circumstances should you repair or alter the product yourself! Entrust all repairs and adjustments of
this product to an authorised service centre or the vendor. Tampering with the appliance during the warranty
period may void the warranty.
The manufacturer is not responsible for damages caused by incorrect use of this product or its accessories.
Such damages include food spoilage, injuries, burns, scalding, fire, etc.
Using accessories or attachments that are not recommended in this user's manual may increase the risk of
injury.
Make sure that the correct battery for this tool is used.
Before connecting to the charger check that the surface of the tool and battery is clean and dry.
Make sure that the battery is charged using the correct charger, which is recommended by the manufacturer.
Incorrect use may lead to a risk of injury by electrical shock, overheating of the battery or leakage of battery
fluid.
Have the tool repaired only by a qualified person
This tool is manufactured in accordance with the demands of respective safety regulations. Repairs should
only be performed by qualified persons using original spare parts. Otherwise the user will be placed in
significant danger.
Disposal of batteries
Ensure that the batteries are safely disposed of according to the manufacturer's instructions.
Electrical safety
The charger of the cordless grass shear & hedge trimmer can be connected to any power plug, preventing
discharge, that is installed according to norms in force.
The plug must be powered at 230 V ~ 50 Hz.
Disconnect the charger if you will not be using it for a long time, if you are changing the tool or performing
maintenance on the tool.
To Next Page
Loading...
