Do you have a question about the Fieldpiece JL3PR and is the answer not in the manual?
measurement range | 29” HgV to 580 psig, 74 cmHgV to 0 to 4000 kPa |
---|---|
accuracy | 29” HgV to 0” HgV: ±0.2” HgV; 74 cmHgV to 0 cmHgV: ±1 cmHgV |
maximum overload pressure | 800 psig (5500 kPa) |
battery type | 2 x AAA, NEDA 24A, IEC LR03 |
---|---|
battery life | 150 hours typical alkaline |
auto power off | 2 hours (APO can be disabled) |
wireless range | 350 feet (107 meters) line of sight |
---|---|
radio frequency | 2.4 GHz |
sensor type | Relative pressure |
operating environment | 32°F to 122°F (0°C to 50°C) at <75% RH |
---|---|
storage temperature | -4°F to 140°F (-20°C to 60°C), 0 to 80% RH |
water resistant | Designed to IP55 |
weight | 0.39 lbs (177 g) |
---|---|
connector type | Standard 1/4" NPT female flare fitting (angled) |
temperature coefficient | 0.1 x (specified accuracy) per 0.6°F |
Install the Fieldpiece Job Link™ app on your mobile device and sign up.
Remove screw from cover and install 2 x AAA batteries.
Press the power button for 1 second to turn the probe on.
Open Measurements in the Job Link™ app and favorite the probe.
View live measurements on your mobile device up to 350 feet away.
Sends long range wireless pressure measurements directly to the Fieldpiece Job Link™ mobile app.
Easily reach service ports in tight spaces using the angled 1/4" fitting.
Features rubberized protective housing for ergonomic and rugged daily use.
Flip the switch to red or blue to identify system side for probe placement.
Equipment tested and found compliant with FCC rules for Class B digital devices.
Probe warranted against defects for one year from date of purchase.
Visit website for the latest information on how to obtain service.
Press and hold the power button for 1 second to power the probe ON or OFF.
Green blink indicates normal operation; red blink signals low battery.
Select Suction (Low Side) or Liquid (High Side) for probe placement.
Program the JL3PR via the Job Link™ app to log measurements over time.
Tap twice to disable or enable the Auto Power Off feature.
Ensure the sensor is open to atmosphere when powering on for auto calibration.
Clean exterior with damp cloth; replace batteries when LED blinks red.
Replace worn gasket to prevent leaks; use pliers to unscrew depressor.
Details measurement range, accuracy, battery life, and wireless range.