Need help?Do you have a question about the Fieldpiece SC680 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Continuity | Yes |
| Diode Test | Yes |
| Warranty | 1 Year |
| Temperature Range | -40 to 752°F |
| Battery | 9V |
| Electrical Measurement | Voltage, Current, Resistance, Capacitance, Frequency, Temperature |
Use meter as specified, inspect for damage, replace leads, avoid abnormal operation.
Avoid storms, explosive environments, adhere to CAT ratings, voltage limits.
30VAC/60VDC pose shock hazard. Use safety glasses, gloves, boots, mats.
Perform continuity test, 3-point safety method, use proper terminals, avoid grounding.
Disconnect leads before opening, test NCV on live wire, respect voltage limits.
Wireless, system efficiency, mini-splits, advanced measurements, True RMS, Inrush.
Lists meter accessories and provides basic operating instructions.
Explains each position on the rotary selector dial for measurements.
Details the function of each button on the meter.
Reference for symbols, icons, and abbreviations used on the display.
Highlights the large dual display and blue backlight for clarity.
How to measure AC voltage, ranges, accuracy, and overload protection.
How to measure DC voltage, ranges, accuracy, and overload protection.
How to detect AC voltage without contact, range, and indicators.
Measuring AC current via clamp, ranges, accuracy, and overload protection.
Measuring frequency via clamp, ranges, accuracy, and current requirements.
Measuring DC current via clamp, ranges, accuracy, and overload protection.
Capturing motor starting amp draw, activation steps, and measurement period.
Measuring small DC currents and frequency using test leads.
Measuring the duty cycle of square wave signals, ranges, and accuracy.
Testing capacitors, discharge warning, ranges, and accuracy.
Testing resistance, terminal pole checks, ranges, and accuracy.
Checking fuses/circuits for open/closed status, indicators, and response time.
Testing diodes for forward/reverse bias, display, and beep indicators.
Measuring temperature with Type K thermocouples and delta T.
Steps to calibrate temperature jacks using ice water.
Details Active, Reactive, Apparent, DC Power, and Power Factor.
How to take power readings and the types of power measured.
Step-by-step guide for testing 3-phase motor rotation direction.
Important notes and conditions for phase rotation testing.
Information on compatibility with Fieldpiece Accessory Heads.
Steps to send measurements wirelessly to the Job Link mobile app.
Details wireless range, frequency, and device compatibility.
How to use Hold, Max/Min, and Auto Power Off (APO) features.
High Voltage Warning, Battery Replacement, Backlight, Manual Ranging.
Details display, environment, power, battery life, dimensions, weight.
Lists safety certifications like UL, CE, FCC, and relevant standards.
Compliance information for FCC and Industry Canada regulations.
Details product warranty terms and how to obtain service.
To Next Page