14
Step 4：Start riding
Please take corresponding protection before starting riding.
The left side is front brake, the right side is rear brake. While riding, it’s recommended to use the rear brake
first, then the front brake to slow down the speed to stop, in order to avoid the front wheel brake is too urgent,
resulting in the bike center of gravity instability caused by falling accident.
Step 5：Braking introduction
Step 3： Function description
Switch and choose the riding mode according to the cycling road conditions and personal needs.
① Switch the power-assisted gear: Equipped with 5 power-assisted gears, please click the "∧""∨" button on the
left handlebar to switch the gear.
② Switch the transmission gear: Equipped with 9 transmission gears, please push outward the shifter on the
right handlebar to switch the gear.
③ Switch the display on meter: Press the "∧" button and hold to switch the display between KMH and MPH. Click
the M button to display the current range, top speed, average speed and total range etc.
Attention: When the bike is on PAS0 state, by then the gear display wont't be lighted and the power assisted m
ode will be turn on. The bike will be on pedalling mode.
To Next Page
Loading...
