2.1 Installation guide
lnstall the handlebar
The basic installation of the bike has been completed before out ofr the factory.When you receive the bike.you only need to
install the handlebar.baskets,headlight, front wheel,pedals and lock the aeat saddle.
① First unscrew and open the handlebar clamp
③Adjust the handlebar to the right position,should be in a parallel with the fork;close the handlebar clamp
and tighten the screw.
（Caution:The screws should be tighten in case safety problems）
② Lift the handlebar upward to the right position
7
To Next Page
Loading...
