Need help?Do you have a question about the Fiio E6 and is the answer not in the manual?
Details on how to power the device on/off and interpret the power indicator light status.
Guide to switching between EQ settings and understanding the EQ indicator light.
Instructions for easy, tool-free attachment and detachment of the back clip.
General| Type | Portable Headphone Amplifier |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Charging Time | 2 hours |
| Input | 3.5mm |
| Output | 3.5mm |
| Output Power | 150mW (16Ω) |
| Signal-to-Noise Ratio | ≥95dB |
| Gain | 0dB |
| Recommended Headphone Impedance | 16 - 150 Ohm |
To Next Page
