charged
6) Charging (powered on): light pulses while still indicating the relevant states;
constantly on while it is fully charged
4 Working as a USB DAC/sound card
1) If the Windows system supports UAC1.0: the USB DAC function of the Q3
can work directly without a driver.
Operation guide: hold the button
⑦
and meanwhile insert the USB cable which
is already connected to a computer into the Q3. After connecting, release the
button
⑦
and select the Q3 as the output device on the computer. (Note that the
driver-free function is only available for systems of Windows7, 8 and 10,
excluding the Windows xp system.)
2) If the Windows system supports UAC2.0: when first connecting the Q3 to the
computer, please go to our website to download the USB DAC driver and
follow the corresponding instructions to install it.
Download link: http://www.fiio.com/supports
3) For MAC computers: there is no need to install the USB DAC driver, so
directly select the Q3 as the output device.
Notes: it is recommended to set the system output volume on the computer to the
max level and then adjust the output volume of the Q3 with its volume knob.
4) When using the included Lightning to Type C cable to connect the Q3 to your
iPhone/iPad/iPod, you could better enjoy your Hi-Res music.
5 Line in (headphone amp mode)
To Next Page
Loading...
