Document No. 26-1789 Issue 1
Subject to change
This document is only intended to be a guideline and is not applicable to all
situations. Information subject to full disclaimer at www.ke.com/disclaimer
INSTALLATION AND MAINTENANCE
INSTRUCTIONS
http://www.ke.co.uk/
resource-downloads/addressable/
General Description
The CIE-A-200 ush mount cradle allows the panel to be ush mounted.
Before Installation
Before installation a cut-out(354mm x 334mm) needs to be made in a solid surface.
Cradle Installation
Insert the cradle into the cut-out and secure using at least four of the six mounting holes. Suitable screws of at least
50mm in length should be used. DO NOT SCREW THROUGH THE CIE-A-200 BACK BOX.
INSERT SCREWS HERE
INSERT SCREWS HERE
23-0329 CIE-A-200 Flush Mount Cradle
To Next Page
General
