Need help?Do you have a question about the Fike TWINFLEXpro and is the answer not in the manual?
General| Event Log | 500 events |
|---|---|
| Operating Temperature | -5°C to +40°C |
| Weight | 3.5 kg |
| Enclosure Rating | IP30 |
| Certifications | EN54-2, EN54-4 |
| Sounder Circuits | 2 |
| Power Supply | 230V AC |
| Relative Humidity | Up to 95% non-condensing |
| Communication Interface | RS-485 |
| Type | Conventional Fire Alarm Control Panel |
| Number of Zones | 2 |
Covers the fundamental design principles of the fire alarm system.
Introduces the function and capabilities of the repeater panel.
Details 24V DC power connections from the control panel.
Explains RS-485 peripheral bus communication and cabling, including EOL resistors.
Procedure for assigning unique addresses to repeaters using DIL switches.
Checklist for verifying correct installation and performing functional tests.
Troubleshooting common issues like synchronization, missing RDUs, and wiring faults.
Explains the status and meaning of each LED indicator on the panel.
Comprehensive technical specifications including dimensions, weight, and operating parameters.
Guidance on actions to take during a fire alarm event, including silencing and resetting.
Steps to take when a fault condition occurs, including muting the buzzer and rectifying the fault.
Instructions on how to obtain technical support and who to contact.
To Next Page
