Fike TWINFLEXpro - Repeater Panel Operation and Controls; Control Panel Front; LED Indication

TWINFLEX
®
pro Repeater Panel Engineering and Commissioning Manual
17
General Operation of Repeater Panel
Control Panel Front
LED Indication
The operation of the LED indication on the front of the repeater panel is described below. The LED
indication on the repeater panel can also be confirmed by checking the message displayed in the
repeater information screen or by accessing the relevant event log from the repeater menu.
Description
Colour
State
Reason
FIRE
Red
Continuous
The control panel is in the fire state. Display will
show the zone of origin.
FAULT
Yellow
Continuous
The control panel is in the fault state. Display will
show the origin.
DISABLED
Yellow
Continuous
This indicates that a disablement action is in place.
TEST
Yellow
Continuous
This indicates that a test routine is in place.
POWER
Green
Continuous
This indicates that power is being supplied to the
panel.
General Indication LEDs
Repeater Information
Screen
Fire Alarm Controls /
Controls Enabled Keyswitch
System Controls