TWINFLEX
®
pro Repeater Panel Engineering and Commissioning Manual
20
End User Training
A Fire Alarm System is of little use if the end user and/or the responsible persons who will be present in
the building do not know how to operate and respond to the system. It is therefore essential that
commissioning includes training for the users of the system and responsible persons.
User instructions and a Zone Chart should be left adjacent to the control panel. As access to the system
must be controlled by responsible persons, it would be unusual to display the access codes on this
notice. These codes must however be available for the responsible persons, so ensure that they know
and record them in a secure place.
The TWINFLEX
®
pro User Guide should be explained and left with the responsible person on site, for
storage in an accessible and known location, in order that the responsible person and the service
engineer may keep information records up to date.
A single page user instruction sheet is included at the end of this manual. A copy of this should be
mounted adjacent to the control panel.
Maintenance
The repeater panel does not require user maintenance, however periodic functional checks should be
carried out by an engineer or responsible persons.
To Next Page
Loading...
