Fike TWINFLEXpro - Fire Alarm Controls; Access Levels

TWINFLEX
®
pro Repeater Panel Engineering and Commissioning Manual
18
Fire Alarm Controls
The main Fire Alarm Controls may be enabled by turning the key switch to the controls enabled position
to go from access level 1 to access level 2.
System Controls
The menus may be navigated to by using the UP / DOWN keys to move the required selection to the
top and pressing ENTER to select the chosen one.
In the example below pressing enter will select current faults.
Press the ESC key to exit to the previous menu.
Access Levels
The menu system is divided into two access levels in order to restrict access to those who require it.
For simple indication, the status of the Controls Enabled light will show the level selected as follows;
Access Level Description
Controls
Enabled LED
Key Operation
1 – NORM
Normal
OFF
N/A
2 – USER
User
ON
YES
Access to the Controls requires the operation of the enable controls key, Access Level 2 (User) in
order to protect against unauthorised access to the system.
Current Events
2. Current Faults
3. Current Disables
Select / /Enter / ESC