3
Parts Included
1. Extrusion Screw 5/8” OD 2:1 Comp
2. Brass Bristle Tube Cleaner
3. Tube Cleaner Extension Rod
4. High-Temperature Resistant Terry Cloth Gloves
5. Copper Gauze
6. Brass Bristle Wheel
7. Brass Flared Tip Pry Tool
8. 1.75mm Bore Nozzle
9. 2.85mm Bore Nozzle
10. 195in³ (3.2L) Slide Valve Hopper with Lid
11. 2x 1lb Bags of Extruder Purge Compound
Tools Required:
Non-marring bench vice (with V-block) for holding screw while cleaning
Powered Drill with a chuck that can receive a 5/16” or larger shank
3/4” Wrench (for nozzles)
Automotive grade wheel bearing grease (small amount)
Recommended:
Never-Seize/Anti-Seize thread lubricant (450ºC rated or higher)
Compressed air & air blower/duster gun
Heat gun or propane torch
Shop Vacuum Cleaner
Filabot Spooler
Filabot Airpath
Call 1-802-505-6772 or visit Filabot.com for additional/replacement parts
To Next Page
Loading...