2
General Specifications
Power Input: 120VAC-13A or 240VAC-6.5A 50/60Hz 1-Phase
1550W MAX - varies with settings
Check S/N Label for proper input voltage
Input Connector Type: IEC 320-C14
Weight: 23kg (50 lbs)
Dimensions: 75.44cm L x 23.11cm W x 21.34cm H(29.7in L x 9.1in
W x 9.75in H) (No Hopper)
Hopper Dimensions: 15.24cm L x 15.24cm W x 21.34cm H (6in L x 6in
W x 8.4in H)
Hopper Volume: 3195.5 cubic cm (195in³)
Total Height: 41.4cm (16.3in) H
(With Hopper)
Temperature Control: 3 PID Controlled Barrel Heat Zones
(aluminum blocks with dual 150W heaters)
1 PID Controlled Feed Throat Heat Zone
2 Manual Speed Controlled Barrel Fans
1 Manual Speed Controlled Feed Throat Fan
1 Manual Speed Controlled Motor Fan
Max Recommended Run Temp: 660°F (350°C)
Drive Control: 0-90VDC PWM Speed Controller with
5A Max Current Limiter
Drive Motor: 1/2 HP 90VDC 4.6A
100 RPM
Torque: 24.3 N*m (215 in-lb)
Gear Ratio 28:1
Grease Lubricated Spur Gearing
Screw: Part # EX6-625
16mm (5/8") Diameter
1/2” Pitch
24 L/D Ratio
17-4 PH Stainless Steel Con. H900
2:1 Compression
Nozzle: Type “X” (7/8"-14 Thread)
To Next Page
Loading...