OVERVIEW
This screen can be reached by swiping left to right from the FiLIP wheel.
Tap on the FiLIP device whose settings you wish to update
A short cut button allows you to Send an SMS or Call.
In addition, you can create, edit or delete information in the following areas
• SafeZones
• Location details
• Child details
• Contacts
• View history
• View watch settings
Contacts
The account holder will automatically be stored as the primary number. You can
add up to 4 additional contacts and by selecting these from your address book, or
manually entering the information.
Once you add a contact, they will be automatically defaulted to be an emergency
contact. Select Emergency contact off if you do not wish them to be an emergency
contact.
Tap SAVE when you’ve added, edited, or deleted any contact information.
The 911 emergency service number for the USA should NOT be stored as a contact
on the FiLIP watch. Similarly, emergency service number for other countries should
not be stored as contacts.
Watch Settings
Map refresh time enables you to set how often the FiLIP watch reports its location
when not in Emergency mode. You may wish to exclude periods when the FiLIP is
not used much, such as evenings and night time.
Turbo mode refreshes the map every 3 min for 15 minutes, after this the map will re-
sume to refreshing at the rate selected in the map refresh setting(15/30/60/standby)
Remember to tap SAVE when you’ve finished adjusting these settings.
To Next Page
Loading...
