Filter Queen Defender - Troubleshooting Guide

8
Troubleshooting Guide
Condition Possible Cause: Corrective Action:
Green indicator on On/Off
power switch will not
illuminate.
Green Power On Indicator
(leaf) on front panel will not
illuminate.
Red Filter Replacement
Indicator is flashing.
Red Filter Replacement
Indicator is illuminated.
All motor speed indicators
flashing, unit will not run.
No motor speed indicators
are flashing, unit will not run.
One motor speed indicator is
flashing, unit is running.
One moor speed indicator is
flashing, unit will not run.
Unit is not supplied with
power.
Control panel is not
supplied with power, OR
control panel is defective.
Time to order replacement
filter.
Time to replace filter and
reset timer.
Unit is operating in
program mode and is
currently programmed to be
off.
Unit is operating in
program set-up mode.
Unit is operating in
program mode and is
currently programmed to
operate at the speed shown
by the indicator.
Unit is operating in
program set-up mode.
• Make sure unit is
plugged into outlet.
• Check outlet for power.
• Check unit for damaged
power cord.
• Unit requires service.
• Make sure power switch
is in the ON position.
• Make sure green indica-
tor on power switch is
illuminated.
• Unit requires service.
• See filter replacement
instructions on page 6 .
• This is a normal
operating condition, see
Filter Replacement
Instructions on Page 6 & 7.
• This is a normal operat-
ing condition, see pro-
gramming instructions
on page 4.
• This is a normal operat-
ing condition, see pro-
gramming instructions
on page 4.
• Press the Down Arrow
Button once to select
high speed.
• This is a normal operat-
ing condition, see pro-
gramming instructions
on page 4.
• This is a normal operat-
ing condition, see pro-
gramming instructions
on page 4.
ENGLISH
Green indicator on On/Off
power switch will not
illuminate.
Green Power On Indicator
(leaf) on front panel will not
illuminate.
All motor speed indicators
flashing, unit will not run
No motor speed indicators
are flashing, unit will not run.
One motor speed indicator is
flashing, unit is running.
One motor speed indicator is
flashing, unit will not run.