Need help?Do you have a question about the FilterSense DynaCHARGE PM 1 PRO-A and is the answer not in the manual?
Details on how to contact FilterSense technical support, including required information and operating hours.
Covers area classification, environment, safety ratings, grounding, and personnel requirements for installation and service.
Lists the order codes for various configurations of the DynaCHARGE™ PM 1, including base unit, power supply, resolution, and probe length.
Guidance on selecting the proper location based on temperature, pressure, area classification, and filter outlet considerations.
Describes available process mount types: Threaded (NPT, BSPT) and Quick-Clamp (Tri-Clamp).
Provides considerations for mounting the sensor probe, including protrusion, extension, welding, and clearance.
Explains grounding requirements for reliable operation and safety, including specific instructions for PM1-T and PM1-A, and hazardous areas.
Overview of the PM 1 user interface, including keypad functions (Up/Next, Right/Enter) and display/LED indicators.
Guidance on signal smoothing adjustment to fine-tune real-time output, with default settings and impact on readings.
Explains alarm activation, settings (setpoint, delay, logic, fail-safe) for two alarms, and fail-safe relay states.
Details the 4-20mA analog output, selectable ranges, and how to use Analog Output Forcing for testing.
General| Category | Accessories |
|---|---|
| Power | 24 VDC |
| Weight | 1 kg (2.2 lbs) |
| Technology | Triboelectric |
| Application | Baghouse Leak Detection, Filter Performance Monitoring, Process Optimization |
| Output | 4-20mA, Alarm Relays, Digital Communication |
| Type | Particulate Emission Monitor |
| Measurement Range | 0.01 to 1000 mg/m3 (Typical) |
| Accuracy | ±5% of reading (Application Dependent) |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
| Operating Humidity | 0-95% RH, non-condensing |
| Power Supply | 24 VDC ±10%, 0.5A |
| Communication Interface | HART (Optional) |
| Dimensions | Enclosure: 120 x 120 x 90 mm (4.7 x 4.7 x 3.5 in) |
To Next Page
