FilterSense DynaCHARGE PM 1 PRO-T

Need help?

Do you have a question about the FilterSense DynaCHARGE PM 1 PRO-T and is the answer not in the manual?

Summary

Notifications

1.1 Technical Support Contact

Contact details, required information, and return procedures for technical support.

1.4 Safety

Safety precautions for area classification, environment, grounding, and personnel.

Installation

3.1 Location and Area Classification

Guidelines for selecting the installation location based on temperature, pressure, and area classification.

3.1 Straight Run and Flow Considerations

3.2 Process Mounts

3.3 Mounting Considerations

Procedures for physically mounting the sensor probe and process mount, including welding.

Wiring

Conduit Entries and Service Loop

Grounding Requirements

Essential grounding requirements for safe and reliable operation, including hazardous areas.

4.1 Terminal Connections (PM 1-A)

Details terminal connections for power and alarm relays on the PM 1-A.

4.1 Terminal Connections (PM 1-T)

Details terminal connections for the loop-powered analog output on the PM 1-T.

Operation

5.1 User Interface Overview

Overview of the user interface, including keypad navigation and status LEDs.

5.2 Settings and User Login

Procedure for accessing settings, user login, and password management.

5.2 Settings (PM 1-A)

5.2 Settings (PM 1-T)

Commissioning

6.1 Signal Smoothing

6.2 Alarms (PM 1-A)

6.3 Analog Output (PM 1-T)

Alarm Setpoint Guidance

Troubleshooting

9.0 Troubleshooting Common Issues

Table of common issues and recommended actions for resolving them.

Maintenance

10.0 Maintenance Procedures