Fini MEGA SD 60 - Compressor Maintenance Menu; Service Life and Component Status Tracking; Component Replacement Logging

MENU D
22
22
MEGA SD - Cod.197DD8100
GB
START-Up AND OpERATION
4.2.2 MAINTENANCE MENU
This menu is used to display short-term maintenance operations, the remaining service
Iife of each component, to reset the Iife counters of each component (where this function
is enabled), to display compressor hours of operation.
> Time to service
xxx hrs
Time remaining for
air filter xxx hrs
Time remaining for
oil filter xxx hrs
Time remaining for
other components
Replacement made for
air filter
Replacement made for
oil filter
Replacement made for
other components
Operating time
Total xxx hrs
Operating time
load xxx hrs
only with access enabled
Confirm replacement
air filter OK?
Confirm replacement
oil filter OK?
Confirm replacement
other components OK?
> M AINTENANCE <
...............
> Time to service
…..
> Components life <
........
ita componenti <
…..
> Comp. replacement <
> Runnung hours <
Press the K4 key to return to the MAINTENANCE
menu from the submenus.