EasyManua.ls Logo

Finnlo EF90 BT - Technical Details; Power Supply

Finnlo EF90 BT
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Technické údaje
6. Technical Details
6.1 Zdroj
Tento trenažér je poháněn elektřinou. Zapojte elek-
trický přívodní kabel do zásuvky ve spodní části
trenažéru a poté do elektrické sítě.
Specifikace:
Příkon: 230 V, 50Hz
Výstup: 9V, 2000A
- Používejte k připojení trenažéru pouze zdroj, který
je součástí balení. Použití jiného zdroje by mohlo vést
k poškození trenažéru.
- Úplným odpojení trenažéru dojde k vymazání
uložených hodnot uživatelských programů U0-U4,
6.1 Power Supply (included in the scope of delivery)
Connect the cable from the power supply to the respective
socked on the lower rear end of the housing.
Power Supply Specification:
Input: 230 V, 50Hz
Output: 9V, 2000mA
Use only the power supply included in the scope of
delivery. If you use another manufacturer’s power
supply, please ensure that it automatically cuts-off in
the event of overload, is short-circuit protected and is
electronically controlled. Non-compliance may result in
short-circuiting and damage to the computer.
Disconnection of the power pack from the mains or of the
power pack plug from the equipment results in a return
to User Selection U0 U4 input mode.
24

Related product manuals