TECHNICAL DATA
I42TD – I60TD
Rev. 00
January 2005
8/36
2.3. TECHNICAL DATA
CHARACTERISTICS I42TD I60TD
Dimensions
Brushes case width 1250 mm. 1690 mm.
Height 1300 mm. 1300 mm.
Washing brushes 3 3
Traction hydraulic Hydraulic
Washing brushes dimension
Ø 400 mm. Ø 480 mm.
Cleaned area 1110 mm. 1400 mm.
Squeegee width 1350 mm. 1650 mm.
Polyethylene solution tank 320 lt. 320 lt.
Polyethylene recovery tank 330 lt. 330 lt.
Petrol tank 18 lt. 18 lt.
Hydraulic oil tank 15 lt. 15 lt.
Front wheel diameter 300 mm. 300 mm.
Rear wheel diameter 300 mm. 300 mm.
Sucked air volume 90 l/s 90 l/s
Brushes pressure 150 kg. 150 kg.
Kerb weight without operator 750 kg. 750 kg.
Motors
Motor diesel Diesel
Cylinders 3 3
Displacement 719 cc 719 cc
Power 16 Kw – 360 rpm 16 Kw – 360 rpm
Brushes hydraulic motor OMR 80 OMR 80
Traction hydraulic motor OMP 160 OMP 160
Variable displacement pump APV 14/9 APV 14/9
Fixed displacement pump MLPD BCG 144 FM MLPD BCG 144 FM
Suction motors 2x800W 13A 16000 rpm 2x800W 13A 16000 rpm
Functions
Drive Man on board Man on board
Minimum corridor for an u-turn 2600 mm. 3000 mm.
Brushes up hydraulic Hydraulic
Squeegee up hydraulic Hydraulic
Service brake Mechanical by means of a lever Mechanical by means of a lever
Parking brake Mechanical by means of a lever Mechanical by means of a lever
Performances
Forward speed 0 ÷ 12 km/h 0 ÷ 12 km/h
Backward speed 0 ÷ 12 km/h 0 ÷ 12 km/h
Maximum overwhelming slope 12% 12%
Maximum slope for a u-turn 2% at 2 km/h 5% at 2 km/h
Cleaned area m
2
/h 8500 11500
Noise 73 dBA 73 dBA
The above mentioned characteristics are not binding for the manufacturer; they can be
changed without any notice . ING.O.FIORENTINI Co. is always at disposal for any information
(par.7.1.).
To Next Page
Loading...
