How to use the machine.
The operator can start the three functions of the machine by means of the three levers next to the driving seat. Make
reference to the scheme below for the explanation of the yellow sticker under the levers (see picture 9).
The operator has to pull the lever down in order to sink down
and start the rotation of the central and side brushes. Pulling
the lever up the hydraulic engines of the brushes stop and the
brushes return in their original position.
The operator has to pull the lever up in order to sink the waste
tank down. Pulling the lever down the tank returns in its original
position.
The operator has to pull the lever up to open the flap and pick
the dust up into the waste tank. Pulling the lever down the flap
closes.
Moving the lever towards the operator and hooking it, the main
brush lifts up. Moving the lever higher, the main brush goes
down.
Picture
To Next Page
Loading...