To Next PageTo Next Page
Need help?Do you have a question about the Fire-Lite Alarms MS-5012 and is the answer not in the manual?
General| Model | MS-5012 |
|---|---|
| Type | Fire Alarm Control Panel |
| NAC Circuits | 2 |
| Standby Battery | 12 VDC |
| Battery Backup | 24 hours standby, 5 minutes alarm |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Max Notification Appliance Circuits (NACs) | 2 |
| Power Supply | 120 VAC, 60 Hz |
| Battery Capacity | 18 Ah (minimum) |
| Relative Humidity | 10% to 93% (non-condensing) |
| Dimensions | 14.5" H x 3.5" D |
Essential safety precautions for panel installation, including power and component handling.
Discusses inherent system limitations and common causes of fire alarm malfunctions.
Lists the key features and capabilities of the MS-5012.
Details the types of initiating and output circuits supported by the panel.
Explains the function of each switch on the MS-5012 front panel.
Describes the LEDs and the 4-digit display on the control panel.
Outlines the functions and capabilities of the integral digital communicator.
Information on optional modules like the ADM-12 Annunciator Driver Module.
Details the RZA-5F Remote Annunciator and its LED indications.
Provides detailed technical specifications for power, circuits, and outputs.
Important warnings and rules regarding telephone line connections and usage.
Describes the default operating mode and its functions.
Details the function of key switches like Reset, Silence, and Mode.
Explains the 7-segment LED displays and the messages they show.
Describes how the panel displays system status, alarms, and faults.
Details how the system responds to alarms, supervisory conditions, and troubles.
Covers the functions of the digital communicator, line supervision, and seizure.
Lists the order of priority for transmitting events to a central station.
Describes cabinet mounting options and dimensions.
Details the five input zones, their types, and specifications.
Explains the notification appliance circuit and relay driver outputs.
Outlines requirements for separating and wiring power-limited circuits.
Shows how to connect the telephone lines for the digital communicator.
Covers AC power input and earth ground connection procedures.
Instructions for installing an optional AC terminal block for power connections.
Describes the ADM-12 Annunciator Driver Module and RZA-5F Remote Annunciator.
Steps to enter the programming mode using a specific code.
Explains the function of switches within the programming mode.
Guide to programming the primary phone number and communication format.
Instructions for setting the system's internal clock.
How to perform a one-man walk test of the system's zones.
Accessing and reviewing stored system events in the history file.
Using the troubleshoot mode to check voltages and system status.
Performing a lamp test to verify all LEDs are functional.
How to connect the MS-5012 as a slave communicator to a host FACP.
Guide for calculating required battery capacity based on load and standby time.
Details the warranty period, coverage, and exclusions for Fire-Lite products.
