EasyManuals Logo

Fire-Lite CMP-2401B Instruction Sheet

Fire-Lite CMP-2401B
1 page
Page #1 background imageLoading...
Page #1 background image
The CMP-2401B/CMP-2402B FACP (Fire Alarm Control Panel) is factory configured with
the Signal Silence Inhibit feature enabled. This feature prevents the silencing of notifica-
tion appliances and resetting of the FACP for 60 seconds after alarm activation. The Alarm
Relay is also configured to transfer on any alarm condition.
Disabling the Signal Silence Inhibit Feature
The Signal Silence Inhibit feature may be disabled, with the approval of the Local Authority Having Jurisdiction,
by removing Jumper JP2 from the FACP main circuit board (refer to the illustration below). When testing the
FACP, it is advisable to temporarily disable the Signal Silence Inhibit feature to allow for immediate silencing of
the Notification Appliance Circuit while the system is being tested.
Disabling the Alarm Relay
The Alarm Relay may be disabled, with the approval of the Local Authority Having Jurisdiction, by removing
Jumper JP3 from the FACP main circuit board (refer to the illustration below). When testing the FACP alarm
circuit(s), it is advisable to temporarily disable the Alarm Relay to prevent activation of circuits connected to the
relay contacts.
CMP-2401B/CMP-2402BCMP-2401B/CMP-2402B
CMP-2401B/CMP-2402BCMP-2401B/CMP-2402B
CMP-2401B/CMP-2402B
AddendumAddendum
AddendumAddendum
Addendum
TT
TT
T
esting Festing F
esting Festing F
esting F
AA
AA
A
CPCP
CPCP
CP
Document 51045 Rev A 9/17/98 ECN 98-425
CMP-2401B/CMP-2402BCMP-2401B/CMP-2402B
CMP-2401B/CMP-2402BCMP-2401B/CMP-2402B
CMP-2401B/CMP-2402B
RemoRemo
RemoRemo
Remo
vv
vv
v
e jumper from JP2 to disabe jumper from JP2 to disab
e jumper from JP2 to disabe jumper from JP2 to disab
e jumper from JP2 to disab
lele
lele
le
the Signal Silence Inhibit fthe Signal Silence Inhibit f
the Signal Silence Inhibit fthe Signal Silence Inhibit f
the Signal Silence Inhibit f
eatureeature
eatureeature
eature
..
..
.
RemoRemo
RemoRemo
Remo
vv
vv
v
e jumper from JP3 to disabe jumper from JP3 to disab
e jumper from JP3 to disabe jumper from JP3 to disab
e jumper from JP3 to disab
lele
lele
le
the Alarthe Alar
the Alarthe Alar
the Alar
m Relam Rela
m Relam Rela
m Rela
y dury dur
y dury dur
y dur
ing testing.ing testing.
ing testing.ing testing.
ing testing.

Other manuals for Fire-Lite CMP-2401B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fire-Lite CMP-2401B and is the answer not in the manual?

Fire-Lite CMP-2401B Specifications

General IconGeneral
BrandFire-Lite
ModelCMP-2401B
CategoryFire Alarms
LanguageEnglish

Related product manuals