Need help?Do you have a question about the Fire-Lite LCD-80F and is the answer not in the manual?
General| Brand | Fire-Lite |
|---|---|
| Model | LCD-80F |
| Category | Fire Alarms |
| Language | English |
Detailed description of the LCD-80F's features, including display, LEDs, sounder, and functions.
Details on the annunciator's components, including terminal blocks, piezo sounder, and membrane connectors.
Explanation of the SW1 DIP switch settings for configuration and operation of the LCD-80F annunciator.
Illustrates typical system configurations, including wiring distances and number of annunciators.
Describes the display messages shown on the LCD-80F, including initialization and communication faults.
Details the functionality of the key-switch and other function switches like Acknowledge, Silence, Drill, and Reset.
Explains the function of each System Status LED (AC Power, Alarm, Trouble, Supervisory, Alarm Silenced).
Guides on preparing the annunciator and electrical boxes for mounting, including grounding.
Instructions for semi-flush mounting using three-gang or ganged electrical boxes.
Instructions for surface mounting using a three-gang electrical box (SBB-3).
Details on powering the LCD-80F, including FACP or external supply, voltage, and current.
Explains the EIA-485 wiring for communication between the FACP and annunciators.
Details how to terminate the EIA-485 cable shield when it is not run in conduit.
Details how to terminate the EIA-485 cable shield when it is run in conduit.
To Next Page
