To Next PageTo Next PageWhy is the burner flame low on my Fire Sense Patio Heater?
A low burner flame on your Fire Sense Patio Heater can be due to several reasons. The pressure might be low, in which case you should replace the LPG tank. Also, check if the tank is low on fuel and fill the LPG tank if needed. Another possible cause is a kinked gas hose; inspect the hose and either straighten it or replace it if necessary.
What to do if my Fire Sense 63057 burner unit has thick black smoke?
If your Fire Sense Patio Heater burner unit is emitting thick black smoke, it indicates a blockage in the burner assembly. To resolve this, thoroughly clean the burner. Also if there is carbon on the reflector and emitter screen, clean these components as needed.
How to fix a Fire Sense 63057 when the main burner won't light?
If the main burner of your Fire Sense Patio Heater won't light, several factors could be the cause. First, ensure the gas valve is turned ON. If it is, check if the fuel tank is empty and refill it if necessary. Air in the supply system can also prevent ignition; purge the air from the lines by opening the gas lines and depressing the control knob for 2-3 minutes. A loose connection could also be the culprit, so check all fittings. If none of these steps work, the orifice might be blocked, requiring cleaning or replacement. If the igniter fails, use a stick lighter to manually light the burner. A dead igniter battery can also prevent ignition, replace it by unscrewing the igniter button. If there's still no gas flow with the cylinder valve open, replace the hose/regulator assembly. Low gas...
Precautions against ignition sources, flammable materials, and proper ventilation.
Warnings about CO poisoning, burn risks, and keeping the area clear.
Guidelines for outdoor use, propane storage, and California Prop 65 chemical exposure.
Advice on proper connections, maintenance, and general handling cautions.
Lists all parts included in the box for the heater.
Details all fasteners and small parts required for assembly.
Connects wheel assembly to the tank base and attaches the cylinder bracket.
Mounts anchoring arms, protection guards, and the reflector.
Installs the glass tube and emitter screen, securing the assembly.
Details requirements for propane supply, cylinder storage, and connection safety.
Step-by-step guide to checking for gas leaks using a soap solution.
Outlines checks before lighting and the ignition sequence for the heater.
Describes burner operation, flame appearance, and proper shutdown procedures.
Instructions for cleaning exterior surfaces and ensuring unobstructed airflow.
Procedures for storing the heater and requirements for professional servicing.
Addresses problems with the main burner not lighting and possible causes.
Covers issues like low burner flame and thick black smoke from the burner.
Details the product's warranty period, what is covered, and exclusions.
Provides instructions on how to obtain warranty service and contact information.
General| Brand | Fire Sense |
|---|---|
| Model | 63057 |
| Category | Patio Heater |
| Language | English |
