Need help?Do you have a question about the Fire Sense Patio Heater and is the answer not in the manual?
Specifies the type of gas, hose, regulator, and installation standards for the heater.
Outlines the steps for performing a leak test on gas connections using soapy water.
Details the heater's design, materials, and key features like piezo ignition and tilt switch.
Lists technical details including fuel type, burner specs, power, consumption, weight, and height.
Lists all components and hardware provided for assembling the patio heater.
Attaching the support legs to the base using M8 x 16 mm bolts.
Connecting the post to the support legs using M6 x 35 mm bolts and nuts.
Connecting the first piece of the post assembly to the post support.
Connecting the second piece of the post assembly to the first.
Placing the tank cover onto the base.
Securing reflector supports, routing gas hose, and connecting to the burner.
Step-by-step guide for igniting the patio heater using the control knob and igniter.
Instructions for safely shutting down the patio heater by turning off the gas supply.
Procedure for safely disconnecting and replacing the gas cylinder.
Recommendations for storing the heater and gas cylinder when not in use.
Guidance on cleaning surfaces, ventilation openings, and components.
Lists common problems, probable causes, and solutions for heater malfunctions.
General| Brand | Fire Sense |
|---|---|
| Model | Patio Heater |
| Category | Patio Heater |
| Language | English |
To Next Page