To Next PageTo Next PageWhat to do if burner flame goes off immediately after ignition in Fire Sense Patio Heater?
If the burner flame of your Fire Sense Patio Heater goes off immediately after ignition, it's likely due to low gas pressure. To address this, let the pilot flame stay lit for 10 minutes before setting the variable knob to 'LO'.
Why is the burner flame low on my Fire Sense PH01-S?
A low burner flame on your Fire Sense Patio Heater could be due to a bent or twisted supply hose; straighten the hose and perform a leak test. Another possibility is a blockage in the burner injector, which would need to be cleaned or replaced.
What to do if burner flame goes off immediately after ignition on Fire Sense PH01-S?
If the burner flame on your Fire Sense Patio Heater goes off immediately after ignition, it could be due to low gas pressure. To address this, let the pilot flame stay lit for 10 minutes before setting the variable knob to 'LO'.
How to fix Fire Sense Patio Heater when burner will not light?
If the burner of your Fire Sense Patio Heater won't light, there are several potential causes. The fuel tank might be nearly empty, resulting in low pressure. Alternatively, the control valve may not be turned ON, so ensure it is. A faulty thermocouple could also be the issue, requiring replacement. Finally, the pilot light assembly might be bent or incorrectly positioned; in this case, place the pilot in the proper position and try again.
What to do if burner flame is low on Fire Sense PH01-S?
If the burner flame on your Fire Sense Patio Heater is low, it could be due to a bent or twisted supply hose; straighten the hose and perform a leak test. Another possible cause is a blockage in the burner injector, which would require cleaning or replacement.
How to fix a Fire Sense PH01-S when the burner will not light?
If the burner on your Fire Sense Patio Heater won't light, there are several potential causes. First, the fuel tank might be nearly empty. Second, the control valve may not be turned ON, so ensure it is. A faulty thermocouple could also be the reason, requiring a replacement. Finally, the pilot light assembly might be bent or not correctly positioned; try placing it in the proper position and retry.
What to do if the emitter glows unevenly on my Fire Sense Patio Heater?
An unevenly glowing emitter on your Fire Sense Patio Heater can stem from a few issues. Check for a blockage in the burner injector and clean or replace it if necessary. Also, ensure the base is on a level surface. Low gas pressure might also be the culprit, so replace the cylinder with a new one.
Why is my Fire Sense PH01-S producing thick black smoke?
Thick black smoke from your Fire Sense Patio Heater usually indicates a blockage in the burner. Turn off the heater and let it cool down. Then, remove the blockage and clear the burner inside and outside.
Why is the emitter of my Fire Sense PH01-S glowing unevenly?
If the emitter of your Fire Sense Patio Heater glows unevenly, it could be due to a blockage in the burner injector, which would require cleaning or replacement. Another cause might be that the base is not on a level surface; make sure to place the heater on a level surface. Low gas pressure can also lead to this issue, so replacing the cylinder with a new one may resolve it.
Why my Fire Sense Patio Heater is producing thick black smoke?
If your Fire Sense Patio Heater produces thick black smoke, it indicates a blockage in the burner. To resolve this, turn off the heater, let it cool down, and then remove the blockage, clearing the burner both inside and outside.
Essential safety guidelines for gas appliance usage and storage of flammable materials.
Lists the tools required and parts included for heater assembly.
Critical warnings regarding carbon monoxide, installation, and outdoor use.
Comprehensive safety rules for installation and operation.
Conditions requiring immediate inspection of the heater for safety issues.
Step-by-step guide for attaching the wheel assembly to the base.
Instructions for assembling the multi-piece reflector unit.
Detailed steps for performing a leak test on gas connections.
Essential checks before turning on the gas supply and lighting.
Step-by-step guide for lighting the heater and turning it off.
Notes on initial smoke/odor and burner behavior during first use.
Instructions for safely shutting down the heater and closing gas supply.
Guidelines for cleaning the heater's exterior surfaces safely.
Checks for hose condition, blockages, and annual inspection for insects.
General| Brand | Fire Sense |
|---|---|
| Model | PH01-S |
| Category | Patio Heater |
| Language | English |
