To Next Page
R
Richard OrtizJul 31, 2025
How to fix Fire Sense LIP-10A-TGG Patio Heater when the main burner will not light?
- DDenise SmithJul 31, 2025
If the main burner of your Fire Sense Patio Heater won't light, here are some things to check: * Ensure the gas valve is turned ON. * Refill the LPG tank if it's empty. * Clean or replace the orifice if it's blocked. * Purge air from the lines by opening the gas lines and depressing the control knob for 2-3 minutes. * Check all fittings for loose connections. * If the igniter fails, use a stick lighter to manually light the burner. * Replace the cylinder or regulator if the gas pressure is low even with the valve fully open. * If it's a new cylinder or the first ignition, purge air from the lines. If there is no gas flow with cylinder valve on, replace the hose/regulator assembly. Also, replace the AAA battery behind the igniter button if it's dead.
General
