Need help?Do you have a question about the FireBird C26 and is the answer not in the manual?
Details the annual servicing requirements for the boiler to maintain efficiency and safety.
Installer responsibilities and hazards of insulation materials and seals, with necessary precautions.
Instructions for handling fuel spillage, including safety precautions and first aid measures.
Overview of installation and safety standards, including BS and OFTEC requirements.
Installer responsibilities and checks required before commencing boiler installation.
Guidance on installing condensing boilers, including OFTEC requirements and flue systems.
Confirms the appliance is tuned to run on Diesel fuel and provides contact for queries.
Details on condensate disposal regulations, System No. 1 trap, and fitting procedures.
Details the optional condensate pump system for condensate disposal.
Guidelines for flue siting, terminal clearances, and regulations.
Information on balanced flue kits, compartment ventilation, and plume dispersal.
Details on chimney installation, flue sizes, and balanced flue system components.
Requirements for low level flue ventilation and checks for boiler burner operation.
Guidelines for diesel tank siting, flexible oil pipes, single pipe systems, and oil line configuration.
Instructions for starting/stopping the boiler, thermostat functions, and burner lockout.
Warnings, positioning, system requirements, maintenance, and fuel specifications for installers.
Guidelines for pipework, sealed heating circuits, and system pressure management.
Procedures for system filling, testing, and electrical supply requirements.
Boiler dimensions, model specifications, component breakdown, performance, and connection details.
Instructions for starting/stopping the boiler, thermostat functions, and burner lockout for Systempac.
Warnings, positioning, system requirements, maintenance, and fuel for Systempac installers.
Guidelines for Systempac pipework, sealed heating circuits, and pressure management.
Procedures for Systempac system filling, testing, and electrical supply requirements.
Systempac boiler dimensions, specifications, component breakdown, performance, and connection details.
Installer/end user responsibilities, commissioning card completion, and system checks.
Checks for diesel tank installation, fuel quality, filter, and remote sensing fire valve.
Checks for boiler components like baffles, condensate trap, and flue installation.
Guidelines for burner setup, nozzle selection, air settings, and flue gas analysis.
Procedure for filling, testing, venting, and checking system pressure and safety valve operation.
Information and advice to be provided to the end user upon completion of commissioning.
Checks for diesel leaks, filter cleaning, and element replacement in the diesel tank.
Instructions for cleaning boiler parts like baffles, heat exchanger, and condensate trap.
Details on servicing the burner, including nozzle, filters, electrodes, and combustion analysis.
Details on warranty periods, coverage for parts and labour, and conditions for validity.
Information on what is not covered by warranty and the process for making claims.
Template for recording annual service details for the boiler, including burner and system checks.
To Next Page
General