Need help?Do you have a question about the FireClass J400 and is the answer not in the manual?
General| Type | Addressable Fire Alarm Control Panel |
|---|---|
| Compliance | EN54-2, EN54-4 |
| Input Voltage | 230VAC |
| Power Supply | 24V DC |
| Battery Capacity | 7Ah |
| Networking | Optional |
| Communication | RS-485 |
Introduction to the J424 and J408 Fire Control panels, highlighting features and benefits.
Details on optional accessory modules and management software for the fire panels.
Detailed description of system inputs, outputs, operating features, and interface components.
Detailed description of the J400-EXT Extinguishment Module and its functions.
Description and meaning of the various status LEDs on the control panel.
Explanation of the function and operation of each control key on the panel.
Procedures for installing control panels, accessory boards, and modules.
Detailed description of control panel terminals and their functions.
Guidelines for system wiring, connecting detectors, call-points, and gas detectors.
Instructions for programming the system using a PC and the J400 Console software.
Steps for programming the system directly from the control panel interface.
Summary of technical features, terminal descriptions, and module current draw.
To Next Page
