PROGRAMMING FROM A PC 37
Enrolling: Expander Modules 37
Enrolling: Extinguishment Modules 37
Activation Mode 38
Times 38
Zones 38
Manual Extinguishment Input 38
Disable Extinguishment Input 38
Pressure Switch Input 38
Enrolling: Power Supply Stations 38
Enrolling: Repeaters and LCD Modules 39
Zones 39
Thresholds 39
Options 40
Times 40
Outputs 40
NAC1 Output 40
NAC2 Output 41
ALARM Output 41
OC Output Events 41
DL Output 41
Panel Settings 42
Day/Night 42
Reset 42
User Code 42
Alarm Verification Time 42
Extinguishment Termination Code 42
Night Mode Silence Time 43
Mains Failure Signalling Delay 43
Date/Time 43
Downloading 43
Restoring Factory Defaults 44
PROGRAMMING FROM THE PANEL 45
Accessing the Programming session 45
Exiting the Programming Session 45
The “ZONES” Programming Phase 46
The “TIMES” Programming Phase 46
The “OUTPUTS” Programming Phase 47
The “PANEL” Programming Phase 47
User Code (Key/LED 1) 48
Day Mode (Key/LED 2) 48
Night Mode (Key/LED 4) 48
Clock (Key/LED 5) 48
Date (Key/LED 7) 48
Mains Off Delay (Key/LED 8) 48
The “VARIOUS” Programming Phase 48
Stabilization Time (Key/LED 1) 48
Reset Time (Key/LED 2) 48
Non-Silenceable Outs (Key/LED 4) 48
Configuration 1 (Key/LED 5) 49
Configuration 2 (Key/LED 7) 49
The “MODULES” Programming Phase 49
Extinguish. time (Key/LED 1) 49
Pre-exting. time (Key/LED 2) 49
Man. Preest-Ex. T. (Key/LED 4) 50
Reset Inhibit T. (Key/LED 5) 50
Zones (Key/LED 7) 50
LCD Module 50
Programming Mode Address 50
Zones Descriptions 50
Strings Update 50
Date Format 50
QUICK GUIDE 51
Technical features 51
Description of the terminals 51
To Next Page
Loading...
