Tap to enter the Vegatouch Mira connection screen.
Navigate to the Switch Panel Info page.
Tap the buttons to adjust screen brightness.
Tap the temperature units display to switch between Fahrenheit and Celsius.
Clean Mode - Disables touchscreen functionality (15 seconds) for the purpose of cleaning.
Tap to enter the Network Diagnostics page.
Please note the GUI and Logic Controller Versions and have these numbers available before calling Technical Support.
When Auto Dimming is enabled, the screen will enter sleep mode after 60 seconds of inactivity. Tap
anywhere on the screen to wake it up. Please note that even if Auto Dimming has been disabled, the
screen will still enter sleep mode after 4 hours of inactivity during daytime hours (5am – 10:59pm) and
after 15 minutes of inactivity during night time hours (11pm-4:59am) as the result of a built in screen
saver that cannot be disabled.
Tap the buttons to adjust time or select 24-hour mode.
To Next Page
Loading...
