Water Tank Readings:
• 9% and below will read “Empty” and
the tank level will show Empty.
• From 10% to 90%, the tank level and
percentage will show as normal.
• 91% and above will read “FULL.” and
the tank shows accurate level.
LP Tank Readings:
• Below 25% will read “Low” and the
tank level will show as normal.
• From 25% to 75%, the tank level and
percentage will show as normal.
• From 75% to 96%, will read “Full” and
the tank level will show as normal.
• 97% and above will read “Disc.” and
the tank level will be empty.
These graphics represent the holding tanks filled
status.
Water Pump – Tap to toggle On/Off.
If the tanks are disconnected the readings will
display as shown.