The Light Master controls all interior lights at once. When Light Master Off is pressed, it will remember
which lights were on. Then, when Light Master On is pressed, it will only turn on the lights that are in
memory. To turn on all lights again, press and hold Light Master On for at least one second.
*Troubleshooting – Memory is rewritten each time Light Master Off is pressed. In the case that it is
pressed twice in a row, it will remember that no lights were on and just touching Light Master On won’t
turn on any lights. Press and hold Light Master On to turn the lights back on.
Awning – Press and hold EXT or RET to operate the awning (ignition must be off).
Set Temp – Tap the arrows to set your desired temperature.
Current temperature and current HVAC mode icons with fan speed indicator – A Blue Snowflake will
display for Air Conditioning and a White Fan graphic will display for Fan Only mode. H or L will indicator
the fan speed (High or Low).
To Next Page
Loading...
Need help?
General
