Firefly X - Additional System Controls; Screen, Power, and LED Settings

www.hawkeyefpv.com.cn
13
Quick Capture : Off /On. ON: It will capture videos when power on.
Grid Display : Off /On. On:It will display the grid on the screen.
TV Mode : NTSC/PAL. PAL, frame rate will be 25/50/100/200; NTSC, frame rate
will be 30/60/120/240.
Auto shutdown : Off/3Min/5Min/10Min. When there is no operations, the
machine will auto shutdown.
Screen Off : Off/10S/30S/1Min/2Min/3Min,5Min/10Min. When there is no
operations,will power off the screen.
LCD Brightness: 25% /50% 75% /100%. Set LCD brightness, when set it low,
the power consumption will be saved.
Light Frequency: Auto, 50HZ, 60HZ.
Status LED : Off/On.Turn ON/OFF status LED on the machine.
Beep : Off/On. Turn ON/OFF beep voice on the machine.
WiFi : ON/OFF. Turn Wifi ON/OFF.Turn Off WiFi, the power consumption will
be saved.
WiFi SSID. You can change WiFi name.
WiFi Password. You could change WiFi passwords here.
Bluetooth auto-start: ON/OFF. When turn off, boot up will be faster. Its
suggested to turn it off to make boot up faster.
Bluetooth Pair.