FireKing KF Series User Manual

101 Security Parkway * New Albany, IN 47150 USA * 800-457-2424/812-948-8400
www.fireking.com
Page 1
Electronic Lock Operating Manual
For FireKing KF Models
TO OPEN SAFES
Insert four 1.5V (AA) batteries after opening the cover of battery.
STEP 1: Press start button “ * “
STEP 2: Press master code (4560) given by the manufacture.
STEP 3: Press the “#” button “Match” will be displayed.
STEP 4: Turn knob/handle to open the safe door.
TO CHANGE PERSONAL CODE (User Code 1)
The Personal code could be input from 4 digits to 16 digits.
STEP 1: Press the reset button located inside on back of door
STEP 2: Enter your new Personal Code (Ex: 5555)
STEP 3: Press the “#”button
STEP 4: LED will display SUCCESS! Or ERROR!
STEP 5: If ERROR is displayed redo from step 1.
Reset Button

FireKing KF Series Specifications

General

Brand	FireKing
Model	KF Series
Category	Locks
Language	English

Summary

Safe Operation

Opening the Safe

Step-by-step instructions for opening the FireKing KF safe using the electronic lock.

Changing Personal Code

Procedure for changing the primary user code, including locating the reset button.

Reset Button for Code Changes

Locating the reset button inside the safe door for initiating personal code changes.

User Code Management

Adding Other User Codes

Instructions for changing or adding additional user codes (Users 2, 3, and 4) to the lock.

Deleting User Codes

Procedure for deleting existing user codes (Users 2-4) from the electronic lock.

Hiding User Codes

Steps to change the display mode to hide user codes from the LCD screen.

System Notices and Maintenance

Battery Replacement Indicator

Guidance on recognizing low battery status and the need for immediate replacement.

User Code Entry Notice

Information on error handling, lockouts, and wait times for incorrect user code attempts.