How to fix a Firepower MST 140i switch that doesn't switch properly?
If the switch on your Firepower Welding System does not switch properly, verify that the correct switch activators located behind the overlay are aligned correctly.
Why is there no shielding gas flow in my Firepower Welding System?
If there is no shielding gas flow in your Firepower Welding System, make sure the shielding gas cylinder isn't empty. Also, ensure the flow meter is correctly adjusted: 15-25 CFH for workshop welding or 35-46 CFH for outdoor welding.
What to do if I am welding in a windy environment with my Firepower Welding System?
If you are welding with your Firepower Welding System in a windy environment, shield the weld area from the wind. Alternatively, increase the gas flow to compensate for the wind.
How to check for gas leaks in my Firepower Welding System?
If you suspect gas leaks in your Firepower Welding System, check for leaks between the regulator and the cylinder connection, and also inspect the gas hose leading to the power source.
General| Brand | Firepower |
|---|---|
| Model | MST 140i |
| Category | Welding System |
| Language | English |
To Next Page
