Document NO.:RD-517E-39-001 Version: D 2017.04.28
- 7 -
Turn on the AC power. The green LED should be lit when
the alarm is operating from AC power.
Test smoke alarm using test button. The alarm will sound
3 short beeps – 1.5 seconds pause. Then repeat it until
release the button.
To prevent injury, this unit must be securely attached to
ceiling in accordance with the installation instructions.
Service and Warranty:
Company warrants to the original consumer. Purchase each
new smoke alarm to be free from defects in material and
workmanship under normal use and service for a period of
If after reviewing this manual you feel that your smoke alarm
is defective in any way, do not tamper with the unit. Return it
for servicing to:
FirePro
138–140 Bayfield Rd East,
Bayswater North, VIC, 3153. Australia.
P (03) 9720 4333 F (03) 9720 4344
MODEL NUMBER: FP240V
Terminal
10
years （exclude battery）from the date of purchase. This
warranty does not cover damage resulting from accident,
misuse or abuse or lack of reasonable care of the product. In no
case shall company be liable for any incidental or consequential
damages for breach of this or any other warranty express or
implied, whatsoever. The bad product can be mailed to the
following address with a detail explanation of problem.
To Previous Page
Loading...
