Firesense 60859 - Page 6

Contact us for assistance: (866) 985-7877 | www.balkenehome.com 6
w½
Insert the end of 1 g³½,>½-gyg¿

into the ring at
the top of 1½gy½

. Insert the opposite end of the½,>½
u½
Place the ³g½-U³gg
B
on top of the fire pit.½Make sure to
use the ³g½/½

½to add or move logs or for removing/
replacing the ³g½-U³gg½
B
¤
9ų½³g½*¿½¶½³g>_Ͻ¿½gÏr
4
5
----L 99
-gyg¿ into the ring of the adjacent gy. Secure by inserting a
¿  into each ring's eyelets (U¸g¸Á to the segment you are
installing), and through the ,>½-gyg¿. Gently tighten but do
not fully tighten, leaving room for adjustment. Repeat to install
remaining 3½,>½-gyg¿¶. When all 4½,>½-gyg¿¶ are
installed, check for alignment, then fully tighten all hardware.
>³_Í>³g½1¶g_[½

½¿ (M6x40) x 8