Firesense 60859 - CARE & MAINTENANCE; Inspecting the Fire Pit; Cleaning the Fire Pit; Storage Guidelines

Contact us for assistance: (866) 985-7877 | www.balkenehome.com 7
INSPECTING:
This outdoor fire pit should be inspected on a r
egular basis to ensure product
safety and longer product life.
½ "/½>¿¿g¿½¿½¶gU¿½¿¶½Å¿_³½Ö³g½¿½Å¿½¿g½Ö³g½¶½"*/9½Å¿½
>_½Ö³g½¿½¶ COOLED COMPLETELY.
1. Check handle on Spark Guard/Fire Screen to make sure it is secure.
2. Check all parts for signs of damage or rust.
3. If you find any damaged parts, do NOT operate until repairs and/or
replacement has been done.
CLEANING:
This outdoor fire pit should be cleaned on a regular basis to promote a
safer experience and longer product life. NOTE: After repeated use, a slight
_¸Uµ>Á¿t¿Ág¿Ú¸¿>Ó¿UUɵ¦
½ "/½>¿¿g¿½¿½Ug>½¿¶½Å¿_³½Ö³g½¿½Å¿½¿g½Ö³g½¶½"*/9½Å¿½
>_½¿g½Ö³g½¿½>¶½Ug_½Ug¿gϤ
Do NOT use oven cleaner or abrasive cleaners as they will damage this product.
½ "/½Ug>½>Ͻ>³¿½t½¿¶½Å¿_³½Ö³g½¿½½>½¶gt½Ug>y½Ìg½>¶½¿½>Ͻ
_>>yg½¿g½Ö¶¤
1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
2. For stubborn surfaces, use a citrus based degreaser and a nylon scrubbing
brush.
3. Rinse with clean water.
4. Remove built-up creosote from components with a chimney cleaning
product.
STORAGE:
½ "/½Ìg½³½¶¿³g½¿¶½Å¿_³½Ö³g½¿½Å¿½¿g½Ö³g½¶½"*/9½Å¿½>_½
¿g½Ö³g½¿½>¶½Ug_½"*/9¤
1. Once the fire is out, coals are cold and outdoor fire pit is cool to the touch,
remove ashes and dispose of properly.
2. It is best to cover the outdoor fire pit with a protective vinyl cover.
3. Store assembled in a location away from children and pets.
NOTE: If you do not use a protective cover for your fire pit, then store this
outdoor fire pit in a dry location to maximize product life.
³g½-g¶g
®
products are made to
resist premature rusting. However,
eventually, all metals will rust.
Some environments promote
premature rusting of metals. For
best results, at the first sign of rust
or other corrosion, use an emery
cloth, metal-grade sand paper or a
rotary tool to buff away the blemish
and touch up the spot with rust-
resistant spray paint available at
local hardware stores.
,½E½ /  