Firesense 60873 - Assembly; Assembly Preparation

Contact us for assistance: (866) 985-7877 | 5
ASSEMBLY
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email at cservice@welltraveled.net.
Place all parts on a soft, level surface for assembly. You will need a screwdriver for assembly.
Estimated Assembly Time: 10 Minutes | DO NOT over tighten hardware!
2
3
1ñ
Pull ring attached to pin on leg assembly of Fire Bowl
E
and
unfold leg down until end of pin slides into hole on the Fire
Bowl. Release ring and leg should be fully extended and locked
in place. Repeat with 3 remaining legs.
2ñ
Attach Handle
A
to Fire Screen
B
using Hex Nut

.
Hardware Used:
¿M6 Nut
3ñ
Place Wood Grate
D
into Fire Bowl
E
. Place Cooking Grill
C
into Fire Bowl. Place Fire Screen onto Fire Bowl.
Í>϶¿É¸g¿Ág¿UÉ_g_¿-U³gg½t¿½/¿¿Á¿Ðg¿Ág¿³g½
-U³gg¿
½Ñg¿Ág¿tµg¿¡Á¿¸¿¿É¸g¿µ¿Á¦¿1¸g¿Ág¿UÉ_g_¿
y½³½>_g¶¿¿Á¿tÁ¿Ág¿y½³¿¦
4ñ
/¿¸Áµg¿Úµg¿¡Á\¿Ñ>Á¿ÉÁ¿Úµg¿¸¿ÉÁ¿>_¿>¸¿U¡gÁgÓ¿
Ug_¦¿,gÐg¿>¸g¸¿>_¿>¿yµ¸¾yµ>Ág¸¿>_¿Úµg¿¸Uµgg¦¿
Pull on ring until pin slides out of hole and then fold leg up against
bottom bowl. Repeat with other 3 legs. Wipe all surfaces clean
with a soft rag and replace all parts inside carry bag.¿ gÐgµ¿t_¿
µ¿¸Áµg¿>¿Á¿tµg¿¡Á¦
ÑÑѦL>ggg¦U