EasyManua.ls Logo

Firesense 62195 - Troubleshooting

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
TROUBLESHOOTING
NOITCAEVITCERROCESUACELBISSOPMELBORP
Burner won’t light
Burner flame is low
Carbon build up-
Thick black smoke
Propane cylinder is empty
Blockage in orifice
Control knob is not in ON position
Gas pressure is low
Control knob fully ON
Dirt or film on burner
Blockage in burner
Remove blockage and clean burner
inside and outside
Check burner and orifices for
blockage
Clean burner
Outdoor temperature is less than 40 degrees
F and tank is less than 1 4 full/
Turn cylinder valve OFF andfill the
cylinder
Use a full cylinder
Turn control knob to ON
Replace propane cylinder
Clear blockage

Related product manuals