Firex BETTERPAN - Setting Setpoint Parameters; Setting Setpoint Values with the Keypad

01
-
UDBRG_V1
-
DIMU
-
00
-
EN
SETTING SETPOINT PARAMETERS
46
16 SETTING SETPOINT PARAMETERS
16.1 SETTING SETPOINT VALUES WITH THE KEYPAD
The following screen appears when setting any setpoint value:
left column: parameter of which you are changing the setpoint value.
right column: keypad + cursor for changing the setpoint.
100°C
20°C 120°C
min max
-------------------
1 2 3 4
5 6 7 8
- 9 0
Fields in the left column have the following meanings:
100°C
RED VALUE: VALUE OF WHICH YOUR ARE CHANGING THE SET
20°C
min
MINIMUM VALUE SETTABLE
120°C
max
MAXIMUM VALUE SETTABLE
x