7
1.3 IMPORTANT NOTES FOR INSTALLATION
The following points are to insure the safe installation and operation of this equipment:
Before connecting any parts of the appliance to supplies, make sure that the latter is
equivalent the requirements stated in the rating plate, if the appliance has been
designed for these supplies.
Observe all clearance requirements.
Disconnect the electrical power supply to the appliance before cleaning or servicing
unit.
All service must be performed by a qualified Technician.
Keep the appliance area free and clear of combustible materials.
Do not obstruct the flow of combustion and ventilation air.
Keep adequate distance for air openings into the combustion chamber.
Always wear the personal protective equipment required by the regulations.
Follow the fire prevention regulations very carefully.
In the water and gas supply systems the absence of "water hammer" must be
guaranteed.
Damage to the operation of the machine.
To Next Page
Loading...
Need help?
General
