EasyManua.ls Logo

Firman 1815 User Manual

Firman 1815
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P/N:380747008 Rev 00
1815
25FT(7.62M)
Question and Answer IconNeed help?

Do you have a question about the Firman 1815 and is the answer not in the manual?

Firman 1815 Specifications

General IconGeneral
BrandFirman
Model1815
CategoryCables and connectors
LanguageEnglish

Summary

Parts Included in Kit

25ft NG Hose Assembly with Flare Fittings

Details the 25ft NG hose with SAE 1/2" flare female swivel and quick connect male.

Quick Connect Adapter

Describes the adapter with 1/2" NPT female and quick connect female sockets.

Coupling Fitting

Explains the coupling with SAE 1/2" flare male and SAE 3/8" flare female.

Important Safety Information

Installation and Code Compliance

Emphasizes licensed plumber installation and adherence to all applicable codes and standards.

Safe Operation and Handling

Covers generator placement, fuel pressure, hose handling, and avoiding kinks/twists.

Maintenance, Inspection, and Storage

Details regular inspection for damage/leaks and indoor storage of the hose assembly.

Hazard Warnings and Leak Testing Precautions

Alerts to NG hazards, Prop 65, and safe practices for leak testing.

Leak Test Procedure

Connecting Adapter to Gas Piping

Connect the Quick Connect Adapter to NG piping, ensuring a shut-off valve is present.

Applying Soapy Water Solution

Check all connections and joints with ammonia-free soapy water for leaks.

Tightening Fittings for Leaks

If leaks are found, turn off gas, tighten fittings, and reapply sealant as needed.

Connecting Hose Assembly to Generator

Attaching Hose to Quick Connect Adapter

Pull back adapter sleeve, insert hose male connector, release sleeve until locked.

Connecting Hose to Generator Inlet

Connect the other side of the hose to the NG inlet connector located on the generator.

Final Leak Check and Rinse

Verifying Connections After Assembly

Check all connections again with soapy water after connecting to the generator.

Rinsing Leak Test Solution

Rinse off the leak test solution with clean water after performing the leak test.

Related product manuals