8. If there is a leak, turn off the gas and then tighten fittings until bubbles do not appear at the
joints.DO NOT attempt to use the Hose until all gas leaks have been repaired. NO pipe dope is
allowed on these type of gas fittings. Pipe dope is only used on NPT threaded connections.
9. Rinse off the leak test solution with clean water after performing the leak test (Figure 11).
Figure 11
Generator
25ft(7.62m) NG Quick
Connect
Hose Assembly
Quick Connect Adapter
NG Piping
NG Shut Off Valve
English Customer Service: 1-844-FIRMAN1
05
Figure 10
Coupling
Pipe Nipple
To Next Page
Loading...
Need help?
General
