English Customer Service: 1-844-FIRMAN1
20
OPERATION
9. Pull the choke knob out to the “START” position.(For electric start move to step (13))
10. For recoil start only - PULL-TO-PRIME Pull the starter cord 1-2 times. Pull slowly until resistance
if felt and then pull rapidly.
7. Flip the engine switch to the “RUN"(l) position.
8. Push the battery power restore switch for about 3 seconds and then release.
11.For recoil start only - Move the choke knob to the “RUN” position.
To Next Page
Loading...
